The highly popular "mixed traction" and extensive lineup can be set according to the purpose of treatment.
It is an effective traction device with three modes including mixed traction.
Traction therapy aimed at alleviating symptoms caused by spinal conditions such as cervical and lumbar spondylosis, herniated discs, and other spine-related issues.
In addition to the conventional continuous and intermittent traction modes, a new mixed traction mode has been added. Along with various functions, more effective treatment is made possible by adjusting the traction angle for each specific body part during treatment. The "ELCANE V R" leads the next generation of traction therapy with a focus on safety.
Features
-
Extensive lineup
The LK-N V series features an extensive lineup, allowing for settings tailored to therapeutic purposes and layouts.
-
3 distinct traction modes
There are three traction modes: continuous traction, intermittent traction, and mixed traction. These three different modes enable more effective treatment.
-
Easy-to-use control panel
The simplified control panel enables easy operation. Even when multiple traction devices are connected, they are easily distinguishable by eight different completion tones.
-
Warm with cold-sensation relief
Equipped as standard with a built-in bed "cooling relief function." No setup hassle, and no unevenness in the lumbar region. The temperature is adjusted to an optimal level via a temperature sensor. In addition to the lumbar section inside the bed, a cervical "cooling relief function" to warm the neck is also equipped as standard.
-
One-touch side arm
This mechanism is designed for enhanced functionality and safety. Because the arm is located at the top, it can also be gripped by hand, improving stability during towing.
-
Safety-controlled ROM
Control circuits provide multi-layered safety monitoring from every angle. When an abnormality is detected, they activate as needed to automatically control traction.
-
Emergency stop switch
The emergency stop switch installed on the upper part of the operation panel allows staff members to manually completely stop the main unit's operation, in addition to the control circuit.
-
Cervical brace with a better fit
EXGEL®, which features properties such as body pressure distribution, shape retention, and shock absorption, is used in the chin rest. It improves the fit to the chin and reduces strain.
-
Lumbar brace with less shift
Non-slip grips are attached to the upper and lower inner sides of the lumbar support brace to minimize slippage, thereby reducing the slipping sensation specific to lumbar traction belts.
-
5-year manufacturer warranty
To ensure you can use it with peace of mind for years to come, it comes with a 5-year manufacturer's warranty.
Note: Repairs in the following cases are subject to a charge even during the warranty period.
• In the event of failure or damage resulting from failure to observe the intended use, contraindications, precautions, operating procedures, maintenance and inspection methods, and other matters described in the instruction manual and attached documents.
• In the case of failure or damage caused by fire, earthquake, wind and flood damage, lightning strike, other natural disasters, pollution, salt damage, gas damage, abnormal voltage or use of an unspecified power source, theft, etc.
• In the case of malfunction or damage caused by transportation, movement, dropping, or impact after purchase
• In the event of maintenance or repair performed by anyone other than our company or a contractor designated by us
• Maintenance or repair using replacement parts other than those specified by our company, or if the product has been modified
Replenishment of consumables and naturally worn parts
Repair to restore scratches or wear from use
If the warranty is lost or cannot be shown
Other faults or damage not deemed our responsibility
Main Specifications
| Item | content |
|---|---|
| Product code | PH-T5521AFJA |
| Brand name | Elkaine V R5521 |
| Generic name | Active automatic intermittent traction unit |
| Medical device certification no. | 229AIBZX00008000 |
| Power | Single-phase AC 100V 50/60Hz |
| Dimensions | Body: W574 x D304 x H860 (mm) |
| Weight | Unit: 65 kg |
| JMDN code | 14106002 |
| Classification | Controlled / specially designated device (repair class 6) |
| Power consumption | 190VA |
| Bed load capacity | Max. 135 kg |
| Traction unit | 2CH |
| traction | 9.8 to 970 N (1 to 99 kgf) [9.8 N ≒ 1 kgf] |
| Traction mode | Intermittent, mix, continuous |
| Treatment time | 1 to 30 minutes (in 1-minute increments) or continuous ± 10% |
| Safety device | malfunction detection circuit, motor detection control circuit, patient stop switch, emergency stop switch |
| Electric shock protection | Class I device with Type B applied part |
| Service life | 8 years |
| Operating environment | Ambient temperature 10 to 40°C, relative humidity 30 to 75%, atmospheric pressure 700 to 1060 hPa |
| Intended use | Used to treat lumbar or cervical spondylosis |
Variations
We will send the PDF to the email address you entered.
Catalog request / contactFor the catalog of the above product and inquiries, please click the button here.