3D water massage bed
Recreating various manual techniques through stimulation combined with the Cube nozzle
The "Aqua Cube S/T (C+2 Nozzle)" retains the 3D water jet stimulation of the Cube nozzle, which has been well-received in higher-end models, while achieving an affordable price point by featuring two nozzles within the tub. It delivers low-cost stimulation to the upper trapezius muscle, something that conventional water massage beds could not achieve.
Recreating various manual techniques through stimulation combined with the Cube nozzle
The "Aqua Cube S/T (C+2 Nozzle)" retains the 3D water jet stimulation of the Cube nozzle, which has been well-received in higher-end models, while achieving an affordable price point by featuring two nozzles within the tub. It delivers low-cost stimulation to the upper trapezius muscle, something that conventional water massage beds could not achieve.
Features
-
Cube nozzles firmly stimulate the upper trapezius!
Looking at the symptoms reported by people in Japan, "stiff shoulders" and "lower back pain" rank at the top.
Acupoints effective in treating cervicobrachial syndrome, commonly known as stiff shoulders, include "Kensei" and the upper trapezius muscle where Kensei is located. Incorporating new technology, Aqua Cube makes it possible to stimulate the "upper trapezius muscle," which was impossible with conventional devices that only provided water pressure stimulation from below.
* From MHLW statistical abstract (FY2023).
-
Stimulation from up to 4 nozzles combined
Two Cube nozzles stimulate the upper trapezius muscles. The other two nozzles move across the entire body while varying the stimulation range.
-
6 distinct massage stimuli
A total of 16 treatment modes have been completed, including the Cube Mode (8 types)—which features improvements to the nozzles, speed variations, and the ratio of intermittent spraying to allow users to experience water pressure stimulation simulating six types of manual techniques (kneading, tapping, loosening, stroking, stretching, and pressing) more effectively and comfortably—and the Conventional Mode (8 types), which accommodates users accustomed to the conventional normal mode.
Varied massage patterns (for kneading)
Even with the same "kneading" stimulation, the most appropriate trajectory is selected depending on the body part.
-
High visibility and operability
-
Anti-seasickness design for more comfortable treatment
The biggest drawback of hydro-massage is that as the massage intensity increases and the head moves, it simultaneously increases the likelihood of inducing motion sickness-like symptoms. Motion sickness is thought to occur when the autonomic nervous system becomes agitated because information from the eyes, the sense of balance felt in the inner ear, and information from the muscles that move the body cannot be properly integrated. Aqua Cube suppresses the swaying of the entire body through an anti-motion-sickness mechanism installed beneath the barrier, and minimizes the swaying of the head through the anti-motion-sickness mechanism of the cube pillow. -
Consideration for the facility
Preheat timer
The water temperature preheating setting can be automatically configured before the start of treatment.
Automatic water temperature control
The water inside the bed allows for precise water temperature settings, allowing treatments to be received at a comfortable temperature at any time.
Electricity bill
Increasing the number of nozzles from two to six does not change the electricity bill compared to the conventional model.
Features
-
Cube nozzles firmly stimulate the upper trapezius!
Looking at the symptoms reported by people in Japan, "stiff shoulders" and "lower back pain" rank at the top.
Acupoints effective in treating cervicobrachial syndrome, commonly known as stiff shoulders, include "Kensei" and the upper trapezius muscle where Kensei is located. Incorporating new technology, Aqua Cube makes it possible to stimulate the "upper trapezius muscle," which was impossible with conventional devices that only provided water pressure stimulation from below.
* From MHLW statistical abstract (FY2023).
-
Stimulation from up to 4 nozzles combined
Two Cube nozzles stimulate the upper trapezius muscles. The other two nozzles move across the entire body while varying the stimulation range.
-
6 distinct massage stimuli
A total of 16 treatment modes have been completed, including the Cube Mode (8 types)—which features improvements to the nozzles, speed variations, and the ratio of intermittent spraying to allow users to experience water pressure stimulation simulating six types of manual techniques (kneading, tapping, loosening, stroking, stretching, and pressing) more effectively and comfortably—and the Conventional Mode (8 types), which accommodates users accustomed to the conventional normal mode.
Varied massage patterns (for kneading)
Even with the same "kneading" stimulation, the most appropriate trajectory is selected depending on the body part.
-
High visibility and operability
-
Anti-seasickness design for more comfortable treatment
The biggest drawback of hydro-massage is that as the massage intensity increases and the head moves, it simultaneously increases the likelihood of inducing motion sickness-like symptoms. Motion sickness is thought to occur when the autonomic nervous system becomes agitated because information from the eyes, the sense of balance felt in the inner ear, and information from the muscles that move the body cannot be properly integrated. Aqua Cube suppresses the swaying of the entire body through an anti-motion-sickness mechanism installed beneath the barrier, and minimizes the swaying of the head through the anti-motion-sickness mechanism of the cube pillow. -
Consideration for the facility
Preheat timer
The water temperature preheating setting can be automatically configured before the start of treatment.
Automatic water temperature control
The water inside the bed allows for precise water temperature settings, allowing treatments to be received at a comfortable temperature at any time.
Electricity bill
Increasing the number of nozzles from two to six does not change the electricity bill compared to the conventional model.
Main Specifications
| Item | content |
|---|---|
| Product code | PH-A8404SA |
| Brand name | Aqua Cube S (4 nozzles) single-phase |
| Generic name | Bed-type massager |
| Medical device certification no. | 227AIBZX00032000 |
| Power | AC200 / 220 V 50/60Hz |
| Dimensions (mm) | W840 x L2,330 x H580 lowest: H510 |
| Weight | 245 kg (475 kg when filled) |
| JMDN code | 34488000 |
| Classification | Controlled / specially designated device (repair class 6) |
| Power consumption | 4.5kVA |
| Water volume | 230L |
| Treatment time | 1 to 99 minutes (1-minute steps) Error of ±5% of the maximum set time |
| Safety device | Leakage protection, overheat prevention |
| Electric shock protection | Class I equipment (permanently installed equipment), equipment with Type B applied part |
| Service life | 6 years (by our standard) |
| Operating environment | Ambient temperature 10 to 40°C (10 to 28°C during device operation), relative humidity 30 to 75%, atmospheric pressure 700 to 1,060 hPa, applied part maximum temperature 43°C (however, when the ambient temperature is 40°C) |
| Item | content |
|---|---|
| Product code | PH-A8404TA |
| Brand name | Aqua Cube T (4 nozzles) three-phase |
| Generic name | Bed-type massager |
| Medical device certification no. | 227AIBZX00033000 |
| Power | AC200V 50/60Hz |
| Dimensions (mm) | W840 x L2,330 x H580 lowest: H510 |
| Weight | 245 kg (475 kg when filled) |
| JMDN code | 34488000 |
| Classification | Controlled / specially designated device (repair class 6) |
| Power consumption | 4.2kVA |
| Water volume | 230L |
| Treatment time | 1 to 99 minutes (1-minute steps) Error of ±5% of the maximum set time |
| Safety device | Leakage protection, overheat prevention |
| Electric shock protection | Class I equipment (permanently installed equipment), equipment with Type B applied part |
| Service life | 6 years (by our standard) |
| Operating environment | Ambient temperature 10 to 40°C (10 to 28°C during device operation), relative humidity 30 to 75%, atmospheric pressure 700 to 1,060 hPa, applied part maximum temperature 43°C (however, when the ambient temperature is 40°C) |
We will send the PDF to the email address you entered.
Catalog request / contactFor the catalog of the above product and inquiries, please click the button here.
