Aqua Cube S/T (6 nozzles)

Features

• Cube nozzles firmly stimulate the upper trapezius!

  Looking at the symptoms reported by people in Japan, "stiff shoulders" and "lower back pain" rank at the top.
  Acupoints effective in treating cervicobrachial syndrome, commonly known as stiff shoulders, include "Kensei" and the upper trapezius muscle where Kensei is located. Incorporating new technology, Aqua Cube makes it possible to stimulate the "upper trapezius muscle," which was impossible with conventional devices that only provided water pressure stimulation from below.
  * From MHLW statistical abstract (FY2023).

  

• Comparative data using thermography (internal measurement data)

  

• Stimulation from up to 6 nozzles combined

  Two Cube nozzles stimulate the upper trapezius. The remaining four nozzles move across the entire body while varying the stimulation area. Additionally, the water pressure from two of the four nozzles provides a more concentrated stimulation sensation.

  

• 6 distinct massage stimuli

  A total of 16 treatment modes have been completed, including the Cube Mode (8 types)—which features improvements to the nozzles, speed variations, and the ratio of intermittent spraying to allow users to experience water pressure stimulation simulating six types of manual techniques (kneading, tapping, loosening, stroking, stretching, and pressing) more effectively and comfortably—and the Conventional Mode (8 types), which accommodates users accustomed to the conventional normal mode.

  

• 6 massage patterns

  

• Anti-seasickness design for more comfortable treatment

  The biggest drawback of hydro-massage is that as the massage intensity increases and the head moves, it simultaneously increases the likelihood of inducing motion sickness-like symptoms. Motion sickness is thought to occur when the autonomic nervous system becomes agitated because information from the eyes, the sense of balance felt in the inner ear, and information from the muscles that move the body cannot be properly integrated. Aqua Cube suppresses the swaying of the entire body through an anti-motion-sickness mechanism installed beneath the barrier, and minimizes the swaying of the head through the anti-motion-sickness mechanism of the cube pillow.

• Side grips and upper bed cover reduce the burden of getting in and out.

  To reduce the strain of getting on and off, the boarding section is set at a height of 51 cm, with handholds provided on the side grips and the upper bed cover. Additionally, when transitioning from a sitting to a supine position, the seasickness prevention mechanism minimizes bed swaying, making it easy to move to the fixed position.

  

• High visibility and operability

  

• Control panel can be placed in 4 positions

  The operation panel can be freely installed in one of four locations to suit the installation site. Additionally, the operation panel can be oriented 360 degrees. Even after installation, it can be adjusted within a 90-degree range to the left or right. It is designed at an easy-to-use height tailored to the operator's line of sight.

  

• Consideration for the facility

  Preheat timer
  The water temperature preheating setting can be automatically configured before the start of treatment.
  
  Automatic water temperature control
  The water inside the bed allows for precise water temperature settings, allowing treatments to be received at a comfortable temperature at any time.
  
  Electricity bill
  Increasing the number of nozzles from two to six does not change the electricity bill compared to the conventional model.

• Weights that hold the legs with moderate load

  The weights are used to secure the device so that the hydraulic pressure stimulation is properly applied to the treatment area. Handles have been added for easier securing. A border has been added to the outer edge of the weight, and the weight is now 1 kg lighter than the conventional model.