Serapia 3300E

Physical therapy For clinics For hospitals / rehab
セラピア3300E

Serapia 3300E

Product code:PH-L3300E

Heats in about 30 seconds

Infrared Therapy Device Cerapia

セラピア3300E

High-efficiency carbon lamp heater for gentle warmth

Carbon (carbon), which is a black body, is known to have a high emissivity of far-infrared radiation. Because carbon lamp heaters use carbon-based heating elements that are close to this black body as the heating element, they are characterized by high far-infrared radiation. They also have a rapid start-up time, reaching the target temperature in about 30 seconds, allowing for efficient treatment. Additionally, the start-up heating time is shorter, making it more economical.

  • Physiological effects of infrared

    By heating the surface of the skin with infrared light, the blood flow to the skin capillaries increases, which is further enhanced by the sweating effect, reducing the skin impedance. As a result, the electrical current flowing into the human body increases, which leads to:Can also be used as prep before electrical therapy.In addition to improving blood circulation, it is also believed to have the effect of relaxing muscle tension, reducing pain, and normalizing the autonomic nervous system—the so-called normalizing effect.
  • About far infrared

    Infrared radiation is electromagnetic radiation with wavelengths ranging from approximately 0.76㎛ to 1000㎛. 50 to 60% of sunlight is in this region. The range of wavelengths from 5.6 to 25㎛ is called far infrared radiation, and it has a well-absorbed property for water and organic matter. On the other hand, the substances that make up the human body are organic molecules other than water molecules; when irradiated with far infrared radiation, there is little energy loss in the air, and when it hits the human body, it first resonates the molecules that make up the human body, resulting in heat generation, making it feel warm.
    Far-infrared features
    1. It is the wavelength range in which substances that make up the human body absorb characteristics; therefore, it can achieve a thermal effect with less energy.
    2. Little attenuation by air
    3. It delivers thermal stimuli to the internal layers of the epidermis and hypodermis, affecting the temperature-sensitive receptors, dense capillaries, sweat glands, and sebaceous glands within the hypodermis. Additionally, heat is conducted not through the epidermis, which has poor thermal conductivity, but into the subcutaneous fat layer, resulting in greater depth of thermal penetration.
    4. The energy resulting from resonance with intramolecular vibrations not only transforms into thermal energy, but some of it may also become latent active energy.
    Furthermore, based on the above considerations, if far-infrared radiation is applied to the human body, the following reasons can be considered as clinical effects:
    ● Increased temperature in the subcutaneous tissue ● Expansion of capillaries ● Promotes blood circulation
    セラピア3300E
  • Radiation characteristic test

    The results of the radiation rate test are shown in Figure 1. From this figure, it can be seen that the central wavelength is 2.5–4.5㎛. Furthermore, infrared absorption to the skin shows strong absorption intensity around 3㎛ and around 6㎛ (far infrared region) (Figure 2). Comparing these two figures, it can be seen that the radiation area of this device is efficiently absorbed into the human body.
    セラピア3300E
    セラピア3300E
  • Reliable design

    A plastic handle is attached to both ends of the heater. You can adjust the heater's angle and height with confidence even while undergoing treatment.

Item content
Product code PH-L3300E
Brand name Serapia 3300
Generic name Infrared therapy device
Certification number 308ACBZX00014000
Power AC 100V 50/60Hz
Dimensions W550×H1,635×D845 (mm) Max dimensions when in operation
Weight 17kg
JMDN code 35147000
Classification Controlled / specially designated device (repair class 6)
Power consumption 310W
Treatment time 1-30 min (1-min steps)
Center wavelength 2.5~4.5μm
Electric shock protection Class I
Service life 8 years
Operating environment Ambient temperature 10 to 40°C, relative humidity 30 to 75%, atmospheric pressure 700 to 1,060 hPa

Catalog request / contact

For the catalog of the above product and inquiries, please click the button here.

GO BACK Back to list