Solid pack / solid warmer
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
No hot water, so energy-saving and efficient!
Easy fitting with 3D packs
The Solid Warmer is a forced hot-air circulation heating device designed to efficiently warm solid packs. Compared to conventional hot pack heating devices that use water, it is extremely easy to use, from equipment management to application during use.
The Solid Warmer is a forced hot-air circulation heating device designed to efficiently warm solid packs. Compared to conventional hot pack heating devices that use water, it is extremely easy to use, from equipment management to application during use.
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Uses 66C latent-heat storage microcapsules
●An elliptical capsule with an average particle size of 100 μm, featuring a safety design that prevents the spilled capsules from scattering into the air even if the pack is accidentally damaged.
The biggest difference from conventional microcapsules is that they have a skeleton inside the capsule, making them resistant to shock and pressure, and resulting in a tough structure that can withstand long-term use.
-
Solid pack features
- No hot water required
- Easy fitting with 3D packs
No towels or vinyl needed, simple and easy
- Temperature holding performance -
Solid pack temperature retention
Features
-
Solid warmer features
This is a forced hot-air circulation heating device designed with the primary concept of reducing labor at work sites and efficiently heating solid packs.
-
Installation location
The hot water-free solid pack requires no water supply or drainage facilities, allowing for free selection of the installation location. Furthermore, because the pack is not wet, dedicated wagon space is also unnecessary. -
How to use
Because the Solid Warmer uses a forced hot-air circulation system, it allows heating with the cover attached and removal with bare hands. It requires neither the troublesome tasks nor the space associated with wet hot packs, and can be used directly on patients. -
Care and cleaning
Since the Solid Pack comes with a washable dedicated cover, there’s no need to wash large quantities of towels or other items. The Solid Warmer also requires only simple, periodic filter replacement, eliminating the need for tedious maintenance tasks such as changing the water or cleaning.
Features
-
Solid warmer features
This is a forced hot-air circulation heating device designed with the primary concept of reducing labor at work sites and efficiently heating solid packs.
-
Installation location
The hot water-free solid pack requires no water supply or drainage facilities, allowing for free selection of the installation location. Furthermore, because the pack is not wet, dedicated wagon space is also unnecessary. -
How to use
Because the Solid Warmer uses a forced hot-air circulation system, it allows heating with the cover attached and removal with bare hands. It requires neither the troublesome tasks nor the space associated with wet hot packs, and can be used directly on patients.
-
Care and cleaning
Since the Solid Pack comes with a washable dedicated cover, there’s no need to wash large quantities of towels or other items. The Solid Warmer also requires only simple, periodic filter replacement, eliminating the need for tedious maintenance tasks such as changing the water or cleaning.
Main Specifications
| Item | content |
|---|---|
| Product code | PE-2550W1-S |
| Brand name | Solid pack (small) |
| Dimensions | 370×160 (mm) |
| Weight | 440 (g) |
| Generic name | Heat pack |
| Notification number | 12B2X10047000010 |
| JMDN code | 37240010 |
| Classification | General medical device |
| Validity period | In principle, one year is desirable, but it can be used if there is no damage to the main body and the Russell cover. |
| Item | content |
|---|---|
| Product code | PE-2550W2-M |
| Brand name | Solid pack (medium) |
| Dimensions | 370×310 (mm) |
| Weight | 860 (g) |
| Notification number | 12B2X10047000011 |
| Item | content |
|---|---|
| Product code | PE-2550W3-L |
| Brand name | Solid pack (large) |
| Dimensions | 460 × 310 (mm) |
| Weight | 1,060 (g) |
| Notification number | 12B2X10047000012 |
| Item | content |
|---|---|
| Product code | PE-2550WS |
| Brand name | Solid pack (knee / shoulder) |
| Dimensions | 345 × 245 (mm) |
| Weight | 920 (g) |
| Notification number | 12B2X10047000013 |
| Item | content |
|---|---|
| Product code | PE-2550WB |
| Brand name | Solid pack (wrist) |
| Dimensions | 330 × 220 (mm) |
| Weight | 740 (g) |
| Notification number | 12B2X10047000014 |
| Item | content |
|---|---|
| Product code | PE-2550WN |
| Brand name | Solid pack (neck) |
| Dimensions | 520 × 280 (mm) |
| Weight | 790 (g) |
| Notification number | 12B2X10047000015 |
| Item | content |
|---|---|
| Product code | PH-HPS60 |
| Brand name | Solid warmer compact |
| Supply voltage | AC 100V 50/60Hz |
| Dimensions | W550×D500×H1,100 (mm) |
| Weight | 50 kg |
| Power consumption | 700 W |
| Chamber capacity | 67 L |
| Capacity guideline | Medium packs approx. 12 |
| Heating method | Forced hot-air circulation |
| Caution | * This device is not a medical device as defined by the Pharmaceuticals and Medical Devices Act. |
| Item | content |
|---|---|
| Product code | PH-HPM120 |
| Brand name | Solid warmer medium |
| Supply voltage | AC 100V 50/60Hz |
| Dimensions | W600 × D500 × H1,350 (mm) |
| Weight | 60 kg |
| Power consumption | 900W |
| Chamber capacity | 124 L |
| Capacity guideline | Medium packs approx. 22 |
| Heating method | Forced hot-air circulation |
| Caution | * This device is not a medical device as defined by the Pharmaceuticals and Medical Devices Act. |
We will send the PDF to the email address you entered.
Catalog request / contactFor the catalog of the above product and inquiries, please click the button here.
